H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 2 Line Processing Units
2-31
2.14.3 Matching Cable
Refer to section 2.11 “LS81T12P” on page 2-21.
2.15 LS81T16P
Figure 2-40 LS81T16P appearance
2.15.1 Technical Specifications
The LS81T16P adopts an XG high-speed bus. It can also serve as the SRPU of the
S7502.
Table 2-28 LS81T16P specifications
Item Specification
CPU MPC8245, 300M
BOOT ROM 512 KB
Flash memory 32 MB
SDRAM 256 MB
Dimensions (W x D) 366.7 x 340 mm (14.4 x 13.4 in.)
Number of ports
z Sixteen autosensing
10/100/1000Base-T Ethernet ports
z Eight 1000Base-X-SFP ports
Maximum power consumption 55 W
Connector RJ-45, LC
Number of ports 24
Port speed
z 10 Mbps half-duplex/full-duplex
z 100 Mbps half-duplex/full-duplex
z 1000 Mbps full-duplex
z MDI/MDI-X autosensing
SFP module Refer to Table 2-22.
Matching cable and maximum
transmission distance
Category-5 twisted pair, with a maximum
transmission distance of 100 m (328.1 ft)