H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 2 Line Processing Units
2-38
(1) Port number (2) Silkscreen of the LPU name
(3) Captive screw (4) LPU edge (purple)
(5) Ejector lever (6) 1000Base-X-SFP port status LED
(7) 1000Base-X-SFP port
Figure 2-48 Partially amplified view of the LS81GP8UB panel
The following table describes the LED of the LS81GP8UB.
Table 2-33 LED description of the LS81GP8UB
LED Status Meaning
OFF No link is present.
ON A link is present.
LINK/ACT
Blinking Data is being transmitted/received.
2.17.3 Matching Cable
Refer to Table 2-22 in section 2.11.3 "Matching Cable" on page 2-23.
2.18 LS82GP20
Figure 2-49 LS82GP20 appearance
2.18.1 Technical Specifications
The LS82GP20 provides twenty 1000Base-X-SFP ports operating in the full-duplex
mode.