H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 2 Line Processing Units
2-44
2.20.2 Panel and LEDs
Figure 2-56 LS81GP48 panel
(1) Silkscreen of the LPU name (2) Captive screw
(3) LPU edge (green) (4) Ejector lever
(5) 1000Base-X-SFP port status LED (6) 1000Base-X-SFP port
Figure 2-57 Partially amplified view of the LS81GP48 panel
The following table describes the LED of the LS81GP48:
Table 2-39 LED description of the LS81GP48
LED Status Meaning
OFF No link is present.
ON A link is present.
LINK/ACT
Blinking Data is being transmitted/received.
2.20.3 Matching Cable
Refer to Table 2-22 in section 2.11.3 "Matching Cable" on page 2-23.