H3C S7500 Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches Chapter 2 Line Processing Units
2-48
Item Specification
XFP modules
z XFP-SX-MM850 (850 nm multi-mode
fiber with a maximum transmission
distance of 300 m [984.3 ft]).
z XFP-LX-SM1310 (1,310 nm
single-mode fiber with a maximum
transmission distance of 10 km [6.2
mi])
z XFP-LH40-SM1550 (1,550 nm
single-mode fiber with a maximum
transmission distance of 40 km [24.9
mi])
z XFP-LH80-SM1550(1,550 nm
single-mode fiber with a maximum
transmission distance of 80 km [49.7
mi])
Compliant standard
z IEEE 802.3
z IEEE 802.3ae
z IEEE 802.1p
z IEEE 802.1Q
z IEEE 802.1D
z IEEE 802.3x
z IEEE 802.3ad
z IEEE 802.1X
z IEEE 802.1s
z IEEE 802.1w
 Note:
When using the LS81TGX2 as an LPU of the S7503/S7506/S7506R, you can only use
it together with a Salience III or Salience III Plus SRPU.
z If you use the LS81TGX2 together with a Salience III Plus SRPU, you can insert it
into any LPU slot on the S7503/S7506/S7506R.
z If you use the LS81TGX2 together with a Salience III SRPU, you can only insert it
into one of the last two LPU slots on the S7503/S7506/S7506R (slot 2 or 3 for the
S7503, slot 5 or 6 for the S7506, and slot 6 or 7 for the S7506R).
2.22.2 Panel and LEDs
Figure 2-62 LS81TGX2 panel