H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Extended VLAN Application
H3C S7500 Series Ethernet Switches Chapter 2
Isolate-User-VLAN Configuration
2-4
To do… Use the command… Remarks
Enter system view
system-view
—
Create a secondary VLAN
vlan vlan-id
Required
2.2.4 Adding Ports to Isolate-User-VLAN and Secondary VLAN
In order to transmit packets normally, all ports included in the isolate-user-VLAN and
the secondary VLANs must be Hybrid ports, and all ports must perform untag operation
on all VLAN packets.
Follow these steps to add ports to isolate-user-VLAN and secondary VLANs and
configure the ports to untag packets:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Configure the port as a hybrid port
port link-type hybrid
Required
Add the port to the
isolate-user-VLAN and the
secondary VLAN
port hyrbrid vlan vlan-id
untagged
Required
Configure the default VLAN ID of
the port
port hybrid pvid vlan vlan-id
Required
Caution:
When you use the port hybrid pvid vlan command to configure the default VLAN ID
for a port, note that you need to specify the vlan-id as a secondary VLAN for a downlink
port and specify the vlan-id an isolate-user-VLAN for an uplink port.
2.2.5 Configuring Mapping Between Isolate-User-VLAN and Secondary
VLAN
Follow these steps to establish mapping relationship between an isolate-user-VLAN
and secondary VLANs: