H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Overview
H3C S7500 Series Ethernet Switches Chapter 3
Product Overview
3-5
Engine
Chassis
Salience III Salience III Plus Salience III Edge
S7506R √
[2]
√ √
[2]
S7506R XGbus √ √ √
[1]
: When an Salience III series engine is used together with an S7503 chassis (with no
XGbus silkscreen), you must use the product 7503 command in system view to
identify the device as an S7503 switch and then restart the switch.
[2]
: When a Salience III/Salience III Edge engine is used together with an S7506R
chassis (with no XGbus silkscreen), the four SFP interfaces on the engine will not work.
3.4 Software Features
The S7500 series provide rich software features, thus meeting the requirements of
different users.
Table 3-7 lists the software features in different modules.
Table 3-7 Software features of the S7500 series
Module Features supported
01-CLI
z Command line interface (CLI)
z Hierarchical protection for commands
z Online help for commands
02-Login
z Local login through the Console port
z Telnet/SSH login through an Ethernet port
z Modem login through the Console port
z NMS Login
03-Configuration
file management
Saving/restoring/deleting configuration file
04-VLAN
z IEEE 802.1Q-compliant VLAN (virtual local area network)
z Port-based VLAN
z Protocol-based VLAN
05-Extended VLAN
application
z Voice VLAN
z isolate-user-VLAN
z Super VLAN
06-IP address-IP
performance-IPX
z IP address configuration of the switch
z TCP attribute configuration of the switch
z IPX (internetwork packet exchange)
07-GVRP GVRP (GARP VLAN registration protocol)
08-QinQ
z QinQ (that is, VLAN VPN)
z Flexible QinQ