H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Link Aggregation
H3C S7500 Series Ethernet Switches Chapter 1
Link Aggregation Configuration
1-6
Table 1-1 Link aggregation types and related descriptions
Aggregation
type
Basic
description
Specific description
Manual
aggregation
z For type-A LPUs, an aggregation group
supports up to 8 selected GE ports or 16
selected FE ports
z For non-type-A LPUs, an aggregation
group supports up to 8 selected GE ports
or 8 selected FE ports
Static/dynamic
aggregation
Support up to 384
aggregation
groups, including
64 load sharing
aggregation
groups
z For type-A LPUs, an aggregation group
supports up to 8 selected GE ports
z For type-A LPUs, an aggregation group
supports up to 24 FE ports, including up to
16 selected ones
z For non-type-A LPUs, an aggregation
group supports up to 48 ports, including
up to 8 selected ones
Table 1-2 and Table 1-3 describe the restriction of type-A LPUs and non-type-A LPUs
on link aggregation respectively.
Table 1-2 Restriction of type-A LPUs on link aggregation
LPU
type
Cross-chip
aggregation
Aggregation
type
LPU
specification
Maximum
number of
ports in an
aggregatio
n group
Maximum
number of
selected
ports in an
aggregatio
n group
LS81FT48A 16 16
LS81FM24A/
LS81FS24A
16 16
Manual
aggregation
LS81GB8UA/
LS81GT8UA
8 8
LS81FT48A 24 16
LS81FM24A/
LS81FS24A
24 16
Type-
A
LPU
Not
supported
Static/dynam
ic
aggregation
LS81GB8UA/
LS81GT8UA
8 8