H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Link Aggregation
H3C S7500 Series Ethernet Switches Chapter 1
Link Aggregation Configuration
1-9
To do… Use the command… Remarks
Enter system view
system-view
—
Create a manual
aggregation group
link-aggregation group
agg-id mode manual
Required
Add a group of ports to the
manual aggregation
group
link-aggregation
interface-type
interface-number to
interface-type
interface-number [ both ]
Optional
Configure a description
for the aggregation group
link-aggregation group
agg-id description
agg-name
Optional
By default, an aggregation
group has no description.
Enter Ethernet port view
interface interface-type
interface-num
—
Add the port to the
aggregation group
port link-aggregation
group agg-id
Required
1.2.2 Configuring a Static LACP Aggregation Group
You can create a static LACP aggregation group, or remove an existing static
aggregation group (after that, the system will re-aggregate the original ports in the
group to form one or more dynamic aggregation groups.).
A port can only be manually added/removed to/from a static aggregation group.
Follow these steps to configure a static LACP aggregation group:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a static
aggregation group
link-aggregation group
agg-id mode static
Required
Configure a description
for the aggregation group
link-aggregation group
agg-id description
agg-name
Optional
By default, an aggregation
group has no description.
Enter Ethernet port view
interface interface-type
interface-number
—
Add the port to the
aggregation group
port link-aggregation
group agg-id
Required