H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – CLI
H3C S7500 Series Ethernet Switches Chapter 1
CLI Overview
1-8
View
Available
operation
Prompt
example
Enter method Quit method
Port-isolate-gr
oup view
Configure
port-isolate-gr
oup
parameters
[H3C-port-isol
ate-group1]
Execute the
port-isolate
group 1
command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
HWping view
Configure
HWping test
group
parameters
[H3C-hwping-
administrator-t
est]
Execute the
hwping
administrator
test command
in system view
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
Public key
view
Configure
RSA public
keys for
secure shell
(SSH) users
[H3C-rsa-publi
c-key]
Execute the
rsa
peer-public-k
ey h3c003
command in
system view.
Execute the
peer-public-k
ey end
command to
return to
system view.
Public key
code view
Edit RSA
public keys of
SSH users
[H3C-rsa-key-
code]
Execute the
public-key-co
de begin
command in
public key
view.
Execute the
public-key-co
de end
command to
return to
public key
view.
PIM view
Configure PIM
parameters
[H3C-pim]
Execute the
pim command
in system
view.
Use the
multicast
routing-enabl
e command in
system view to
enable
multicast
routing if
multicast
routing is
disabled.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.