H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – CLI
H3C S7500 Series Ethernet Switches Chapter 1
CLI Overview
1-9
View
Available
operation
Prompt
example
Enter method Quit method
RIP view
Configure RIP
parameters
[H3C-rip]
Execute the
rip command
in system view
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
OSPF view
Configure
OSPF
protocol
parameters
[H3C-ospf-1]
Execute the
ospf
command in
system view
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
OSPF area
view
Configure
OSPF area
parameters
[H3C-ospf-1-a
rea-0.0.0.1]
Execute the
area 1
command in
OSPF view
Execute the
quit command
to return to
OSPF view.
Execute the
return
command to
return to user
view.
BGP view
Configure
parameters for
the border
gateway
protocol
(BGP)
protocol
[H3C-bgp]
Execute the
bgp 100
command in
system view
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
BGP IPv4
family
multicast view
Configure
parameters for
BGP IPv4
family
multicast
[H3C-bgp-af-
mul]
Execute the
ipv4-family
multicast
command in
BGP view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.