H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – CLI
H3C S7500 Series Ethernet Switches Chapter 1
CLI Overview
1-10
View
Available
operation
Prompt
example
Enter method Quit method
IS-IS view
Configure
IS-IS
parameters
[H3C-isis]
Execute the
isis command
in system
view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
ES-IS view
Configure
parameters for
the ES-IS
protocol
[H3C-esis]
Execute the
esis
command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
Routing policy
view
Configure
routing
policies
[H3C-route-po
licy]
Execute the
route-policy
policy1 permit
node 10
command in
system view
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
Basic ACL
view
Define rules
for a basic
ACL (ACLs
with their IDs
ranging from
2000 to 2999
are basic
ACLs.)
[H3C-acl-
basic-2000]
Execute the
acl number
2000
command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
Advanced
ACL view
Define rules
for an
advanced ACL
(ACLs with
their IDs
ranging from
3000 to 3999
are advanced
ACLs.)
[H3C-acl-
adv-3000]
Execute the
acl number
3000
command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.