H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – CLI
H3C S7500 Series Ethernet Switches Chapter 1
CLI Overview
1-11
View
Available
operation
Prompt
example
Enter method Quit method
Layer 2 ACL
view
Define the
sub-rules of
Layer 2 ACLs,
which is
numbered
from 4,000 to
4,999.
[H3C-acl-link-
4000]
Execute the
acl number
4000
command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
User-defined
ACL view
Define the
sub-rules of
user-defined
ACLs, which
are in the
range of 5000
to 5999
[H3C-acl-user
-5000]
Execute the
acl number
5000
command in
system view
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
Traffic-group
view
Configure
traffic group
parameters
[H3C-traffic-gr
oup-1]
Execute the
traffic-accou
nting
traffic-group
1 command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
QoS view
Configure
QoS
parameters
[H3C-qoss-Gi
gabitEthernet
4/0/1]
or:
[H3C-qosb-Gi
gabitEthernet
4/0/1]
Execute the
qos command
in Ethernet
port view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
QinQ view
Create QinQ
instances and
configure
parameters for
QinQ
[H3C-GigabitE
thernet4/0/1-vi
d-1000]
Execute the
vlan-vpn vid
1000
command in
Ethernet port
view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.