H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 4 OSPF Configuration
4-24
To do... Use the command... Remarks
Enter system view
system-view
—
Configure OSPF
MIB binding
ospf mib-binding process-id
Optional
By default, MIB is bound
to the first enabled OSPF
process. When multiple
OSPF processes are
enabled, you can
configure to which OSPF
process the MIB is bound.
Enable OSPF Trap
snmp-agent trap enable ospf
[ process-id ] [ ifauthfail |
ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit |
lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifauthfail | vifcfgerror |
virifrxbadpkt |
virifstatechange |
viriftxretransmit |
virnbrstatechange ]*
Optional
You can configure OSPF
to send diversified SNMP
TRAP messages and
specify a certain OSPF
process to send SNMP
TRAP messages by
process ID.