H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 5 IS-IS Configuration
5-10
To do... Use the command... Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Assign a DIS priority
isis dis-priority value
[ level-1 | level-2 ]
Optional
The default DIS priority is 64.
5.3.5 Configuring Router Type
Follow these steps to configure router type:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ] —
Configure router type
is-level { level-1 |
level-1-2 | level-2 }
Required
By default, the router type
is level-1-2.
5.3.6 Configuring the Line Type of an Interface
Follow these steps to configure the interface line type:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Configure the line type of
an interface
isis circuit-level [ level-1
| level-1-2 | level-2 ]
Required
The default line type is
level-1-2.
 Note:
Changing interface line type makes sense only when the interface is on a Level-1-2
router. Otherwise, the router type determines the adjacency hierarchy that can be
established.