H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 5 IS-IS Configuration
5-23
Follow these steps to reset all IS-IS configuration data:
To do... Use the command... Remarks
Enter system view
system-view
—
Reset all IS-IS
configuration data
reset isis all
Required
By default, IS-IS configuration
data is not cleared.
5.3.26 Resetting Configuration Data of an IS-IS Peer
Follow these steps to reset configuration data of the IS-IS peer:
To do... Use the command... Remarks
Enter system view
system-view
—
Reset configuration
data of an IS-IS peer
reset isis peer
system-id
Required
By default, configuration data
of an IS-IS peer is not reset.
5.4 Displaying and Maintaining Integrated IS-IS
Configuration
To do... Use the command... Remarks
Display brief information
of IS-IS
display isis brief
Display IS-IS link state
database
display isis lsdb [ [ l1 | l2 | level-1 |
level-2 ] | [ [ lsp-id | local ] |
verbose ]* ]*
Display IS-IS SPF logs display isis spf-log { ip | clns }
Display IS-IS routes
display isis route
Display IS-IS peer
information
display isis peer [ verbose ]
Display mesh group
information
display isis mesh-group
Display IS-IS interface
information
display isis interface [ verbose ]
Available in
any view