H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 6 BGP Configuration
6-13
To do...
Use the
command...
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Filter the received global
routing information
filter-policy
{ acl-number |
ip-prefix
ip-prefix-name }
import
Required
By default, the received
routing information is not
filtered.
Specify a route filtering policy
for routes coming from a
peer/peer group
peer { group-name |
ip-address }
route-policy
policy-name import
Required
By default, no route filtering
policy is specified for a
peer/peer group.
Specify an
ACL-based BGP
route filtering
policy for a
peer/peer group
peer { group-name |
ip-address }
filter-policy
acl-number import
Specify an AS
path ACL-based
BGP route
filtering policy for
a peer/peer
group
peer { group-name |
ip-address }
as-path-acl
acl-number import
Filter the
routing
information
received
from a
peer/peer
group
Specify an IP
prefix list-based
BGP route
filtering policy for
a peer/peer
group
peer { group-name |
ip-address }
ip-prefix
ip-prefix-name
import
Required
By default, no ACL-based
BGP route filtering policy,
AS path ACL-based BGP
route filtering policy, or IP
prefix list-based BGP route
filtering policy is configured
for a peer/peer group.
6.4.7 Configuring BGP-IGP Route Synchronization
Follow these steps to configure BGP-IGP route synchronization:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Disable BGP-IGP route
synchronization
undo synchronization
Required
By default, BGP routes
and IGP routes are not
synchronized.