H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches Chapter 1
Logging into an Ethernet Switch
1-2
1) The absolute user interface indexes are as follows:
z AUX user interface: 0
z VTY user interfaces: Numbered after the AUX user interface. The absolute index
of the first VTY user interface is greater than that of the AUX user interface by 1
and the following VTY user interface indexes increase in the step of 1
2) A relative user interface index can be obtained by appending a number to the
identifier of a user interface type. It is generated by user interface type. The
relative user interface indexes are as follows:
z AUX user interface: AUX 0
z VTY user interfaces: VTY 0, VTY 1, VTY 2, and so on.
1.2.3 Common User Interface Configuration
To do… Use the command… Remarks
Lock the current user
interface
lock
Optional
Execute this command in
user view.
A user interface is not locked
by default.
Specify to send messages
to all user interfaces/a
specified user interface
send { all | number |
type number }
Optional
Execute this command in
user view.
Disconnect a specified user
interface
free user-interface
[ type ] number
Optional
Execute this command in
user view.
Enter system view
system-view
—
Enter user interface view
user-interface
[ type ] first-number
[ last-number ]
—
Set the command that is
automatically executed
when a user logs into the
user interface
auto-execute
command text
Optional
By default, no command is
automatically executed
when a user logs into a user
interface.
Display the information
about the current user
interface/all user interfaces
display users [ all ]
Display the physical
attributes and configuration
of the current/a specified
user interface
display
user-interface [ type
number | number ]
Optional
These two commands can
be executed in any view.