H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches Chapter 8 Route Capacity Configuration
8-3
Caution:
If automatic protocol recovery is disabled, the broken OSPF, ISIS, or BGP connection
will not recover even when the value of free memory exceeds the safety value.
Therefore, do not disable this function if not necessary.
8.3 Displaying and Maintaining Route Capacity Configuration
To do... Use the command... Remarks
Display memory occupancy
of a switch
display memory [ slot slotnumber ]
Display the memory setting
and status information
related to route capacity
display memory limit
Available in
any view