H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Multicast
H3C S7500 Series Ethernet Switches Chapter 2
GMRP Configuration
2-2
To do... Use the command... Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Enable GMRP on the port
gmrp
Required
Disabled by default.
2.3 Displaying and Maintaining GMRP
To do... Use the command... Remarks
Display the GMRP statistics
information
display gmrp statistics
[ interface interface-list ]
Display the GMRP global status
display gmrp status
Available in any
view
2.4 GMRP Configuration Example
2.4.1 Enabling GMRP
I. Network requirements
Implement dynamic registration and update of multicast information between switches.
II. Network diagram
Ethernet2/0/1
SwitchB
Ethernet2/0/1
SwitchA
Figure 2-1 Networking diagram for GMRP configuration
III. Configuration procedure
Configure SwitchA:
# Enable GMRP globally.
<H3C> system-view
[H3C] gmrp
GMRP is enabled globally.
# Enable GMRP on the port.
[H3C] interface Ethernet2/0/1
[H3C-Ethernet2/0/1] gmrp