H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches Chapter 2
Logging in through the Console Port
2-4
Table 2-2 Common configuration of console port login
Configuration Remarks
Baud rate
Optional
The default baud rate is 9,600 bps.
Check mode
Optional
By default, the check mode of the console port is
set to none, which means no check bit.
Stop bits
Optional
The default stop bits of a console port is 1.
Console port
configuration
Data bits
Optional
The default data bits of a console port is 8.
AUX user
interface
configuration
Configure the
command level
available to the
users logging
into the AUX
user interface
Optional
By default, commands of level 3 are available to
the users logging into the AUX user interface.
Make terminal
services
available
Optional
By default, terminal services are available in all
user interfaces
Set the
maximum
number of lines
the screen can
contain
Optional
By default, the screen can contain up to 24 lines.
Set history
command buffer
size
Optional
By default, the history command buffer can
contain up to 10 commands.
Terminal
configuration
Set the timeout
time of a user
interface
Optional
The default timeout time is 10 minutes.
Caution:
Changing of console port configuration terminates the connection to the console port.
To establish the connection again, you need to modify the configuration of the terminal
emulation program running on your PC accordingly. Refer to
Figure 2-4 for the
configuration.