H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches Chapter 2
Logging in through the Console Port
2-5
2.3.2 Console Port Login Configurations for Different Authentication Modes
Table 2-3 lists console port login configurations for different authentication modes.
Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
Console port login
configuration
Remarks
None
Perform
common
configuration
Perform common
configuration for
console port login
Optional
Refer to
Table 2-2 for detail.
Configure the
password
Configure the
password for
local
authentication
Required
Password
Perform
common
configuration
Perform common
configuration for
console port login
Optional
Refer to
Table 2-2 for detail.
Specify to
perform local
authenticatio
n or RADIUS
authenticatio
n
AAA configuration
specifies whether
to perform local
authentication or
RADIUS
authentication
Optional
Local authentication is
performed by default.
Refer to the
AAA&RADIUS&HWTACAC
S&EAD module for more.
Configure
user name
and
password
Configure user
names and
passwords for
local/RADIUS
users
Required
z The user name and
password of a local user
are configured on the
switch.
z The user name and
password of a RADIUS
user are configured on
the RADIUS server.
Refer to user manual of
RADIUS server for more.
Manage AUX
users
Set service type
for AUX users
Required
Scheme
Perform
common
configuration
Perform common
configuration for
console port login
Optional
Refer to
Table 2-2 for detail.
 Note:
Changes of the authentication mode of console port login will not take effect
immediately. The changes take effect after you quit the command-line interface and
then enter it again.