H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches Chapter 2
Logging in through the Console Port
2-7
To do… Use the command… Remarks
Set the maximum number of
lines the screen can contain
screen-length
screen-length
Optional
By default, the screen
can contain up to 24
lines.
You can use the
screen-length 0
command to disable
the function of
displaying information
in pages.
Set the history command buffer
size
history-command
max-size value
Optional
The default history
command buffer size is
10. That is, a history
command buffer can
store up to 10
commands by default.
Set the timeout time for the user
interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout
time of a user interface
is 10 minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated
if no operation is
performed in the user
interface within 10
minutes.
You can use the
idle-timeout 0
command to disable
the timeout function.
Note that the command level available to users logging into a switch depends on both
the authentication-mode none command and the user privilege level level
command, as listed in the following table.