H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-24
1.4.3 Configuring RADIUS Accounting Servers
Table 1-14 Configure RADIUS accounting server
To do... Use the command... Remarks
Enter system view
system-view
—
Create a RADIUS scheme
and enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS
scheme named system
has already been created
in the system.
Set the IP address and
port number of the
primary RADIUS
accounting server
primary accounting
ip-address [ port-number ]
Required
By default, the IP address
and UDP port number of
the primary accounting
server are 0.0.0.0 and
1813.
Set the IP address and
port number of the
secondary RADIUS
accounting server
secondary accounting
ip-address [ port-number ]
Optional
By default, the IP address
and UDP port number of
the secondary accounting
server are 0.0.0.0 and
1813.
Enable stop-accounting
packet buffering
stop-accounting-buffer
enable
Optional
By default,
stop-accounting packet
buffering is enabled.
Set the maximum number
of transmission attempts
of the buffered
stop-accounting packets.
retry stop-accounting
retry-times
Optional
By default, the system
tries at most 500 times to
transmit a buffered
stop-accounting request.
Set the maximum number
of real-time accounting
request attempts
retry
realtime-accounting
retry-times
Optional
By default, the maximum
number of real-time
accounting request
attempts is 5. After this
number is reached, the
user connection is cut
down.