H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-33
z Configuring HWTACACS Authentication Servers
z Configuring HWTACACS Authorization Servers
z Configuring HWTACACS Accounting Servers
z Configuring Shared Keys for HWTACACS Packets
z Configuring the Attributes for Data to be Sent to TACACS Servers
z Configuring the Timers of TACACS Servers
1.5.1 Creating a HWTACACS Scheme
HWTACACS protocol is configured scheme by scheme. Therefore, you need to create
a HWTACACS scheme and enter HWTACACS view before you perform other
configuration tasks.
Table 1-23 Create a HWTACACS scheme
To do... Use the command... Remarks
Enter system view
system-view
—
Create a HWTACACS
scheme and enter
HWTACACS view
hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no
HWTACACS scheme
exists.
Caution:
The system supports up to 16 HWTACACS schemes. You can only delete the schemes
that are not being used.
1.5.2 Configuring HWTACACS Authentication Servers
Table 1-24 Configure HWTACACS authentication servers
To do... Use the command... Remarks
Enter system view
system-view
—
Create a HWTACACS
scheme and enter its view
hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no
HWTACACS scheme
exists.