H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches Chapter 2
Logging in through the Console Port
2-14
To do… Use the command… Remarks
Configure to
authenticate users
locally or remotely
using user name and
password
authentication-mode
scheme [ command-
authorization ]
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
Users are authenticated locally
by default.
Set the
baud rate
speed speed-value
Optional
The default baud rate of the
AUX port (also the console port)
is 9,600 bps.
Set the
check
mode
parity { even | mark |
none | odd | space }
Optional
By default, the check mode of a
console port is set to none, that
is, no check bit.
Set the
flow
control
mode
flow-control
{ hardware | none |
software }
Optional
By default, a console port does
not perform flow control.
Set the
stop bits
stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a
console port is 1.
Configure
the
console
port
Set the
data bits
databits { 7 | 8 }
Optional
The default data bits of a
console port is 8.
Configure the
command level
available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of level 3
are available to users logging
into the AUX user interface.
Make terminal services
available to the user
interface
shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum
number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function of displaying
information in pages.