H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-39
You can use the reset command in user view to clear the corresponding statistics.
Table 1-30 Display AAA configuration information
To do... Use the command... Remarks
Display the configuration
information about one
specific or all ISP
domains
display domain [ isp-name ]
Display the information
about user connections
display connection [ access-type
dot1x | domain domain-name |
interface interface-type
interface-number | ip ip-address | mac
mac-address | radius-scheme
radius-scheme-name | vlan vlan-id |
ucibindex ucib-index | user-name
user-name ]
Display the information
about local users
display local-user [ domain isp-name
| idle-cut { disable | enable } | vlan
vlan-id | service-type { ftp |
lan-access | ssh | telnet | terminal } |
state { active | block } | user-name
user-name ]
You can
execute the
display
command in
any view
Table 1-31 Display and maintain RADIUS configuration information
To do... Use the command... Remarks
Display the statistics about
local RADIUS
authentication server
display local-server statistics
Display the configuration
information about one
specific or all RADIUS
schemes
display radius
[ radius-scheme-name ]
Display the statistics about
RADIUS packets
display radius statistics
Display the buffered
no-response RADIUS
stop-accounting request
packets
display stop-accounting-buffer
{ radius-scheme
radius-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
You can
execute the
display
command in
any view