H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-40
To do... Use the command... Remarks
Delete the buffered
no-response
stop-accounting request
packets
reset stop-accounting-buffer
{ radius-scheme
radius-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
Clear the statistics about
the RADIUS protocol
reset radius statistics
You can
execute the
reset
command in
user view
Table 1-32 Display and maintain HWTACACS protocol information
To do... Use the command... Remarks
Display the configuration
or statistic information
about one specific or all
HWTACACS schemes
display hwtacacs
[ hwtacacs-scheme-name [ statistics] ]
Display the buffered
HWTACACS
stop-accounting request
packets that are not
responded to
display stop-accounting-buffer
{ hwtacacs-scheme
hwtacacs-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
You can
execute the
display
command in
any view
Clear the statistics about
the TACACS protocol
reset hwtacacs statistics
{ accounting | authentication |
authorization | all }
Delete the buffered
stop-accounting request
packets that are not
responded to
reset stop-accounting-buffer
{ hwtacacs-scheme
hwtacacs-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
You can
execute the
reset
command in
user view
1.7 AAA & RADIUS & HWTACACS Configuration Example
1.7.1 Remote RADIUS Authentication of Telnet/SSH Users
 Note:
The configuration procedure for the remote authentication of SSH users through
RADIUS server is similar to that of Telnet users. The following description only takes
the remote authentication of Telnet users as example.