H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Traffic Accounting

H3C S7500 Series Ethernet Switches Chapter 1

Traffic Accounting Configuration

1-5

II. Network diagram

Internet

User

CAMS

Switch

Figure 1-2 Network diagram for traffic accountin

III. Configuration procedure

# Configure a traffic accounting group named somegroup.

<H3C> system-view

[H3C] traffic-accounting traffic-group somegroup

# Configure the following two destination network IP addresses for the traffic

accounting group.

[H3C-traffic-group-somegroup] network 11.127.1.0 24

[H3C-traffic-group-somegroup] network 12.127.1.0 24

# Enter the user's domain view (suppose the user belongs to domain aaa), set the

accounting mode to traffic accounting and configure the domain to use the traffic group.

[H3C] domain aaa

[H3C-isp-aaa] accounting-mode traffic

[H3C-isp-aaa] traffic-group somegroup rate 1

# Configure a traffic accounting card, specify a traffic collection card, and enable the

traffic accounting function.

[H3C] traffic-accounting accounting-slot 2

[H3C-accounting-slot-2] traffic-slot 3

[H3C-accounting-slot-2] accounting enable