H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – VRRP-HA
H3C S7500 Series Ethernet Switches Chapter 1
VRRP Configuration
1-7
Task Remarks
Configuring a Virtual Router IP Address Required
Configuring Backup Group-Related Parameters Required
1.2.2 Configuring a Virtual Router IP Address
The following table lists the operations to configure a virtual router IP address (suppose
you have correctly configured the relation between the port and VLAN):
Follow these steps to configure a virtual router IP address:
To do… Use the command… Remarks
Enter system view system-view —
Configure that the virtual
IP address can be pinged
vrrp ping-enable
Optional
By default, the virtual IP
address cannot be
pinged.
Map the virtual router IP
address to a MAC
address
vrrp method { real-mac |
virtual-mac }
Optional
By default, the virtual IP
address of a backup
group is mapped to a
virtual router IP address.
Create a VLAN
vlan vlan-id
—
This operation creates the
VLAN to which the backup
group corresponds. The
vlan-id argument is the ID
of the VLAN.
Return to system view
quit
—
Enter VLAN interface view
interface Vlan-interface
vlan-id
—
Configure a virtual router
IP address
vrrp vrid virtual-router-id
virtual-ip virtual-address
Optional
1.2.3 Configuring Backup Group-Related Parameters
Follow these steps to configure backup group-related parameters:
To do… Use the command… Remarks
Enter system view system-view —
Create a VLAN
vlan vlan-id
—
Return to system view
quit
—