H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Login
H3C S7500 Series Ethernet Switches Chapter 3
Logging in through Telnet
3-3
Authentication
mode
Telnet configuration Description
Specify to
perform local
authentication
or RADIUS
authentication
AAA configuration
specifies whether
to perform local
authentication or
RADIUS
authentication
Optional
Local authentication is
performed by default.
Refer to the
AAA&RADIUS&HWTACA
CS&EAD module for
more.
Configure user
name and
password
Configure user
names and
passwords for
local/RADIUS
users
Required
z The user name and
password of a local
user are configured on
the switch.
z The user name and
password of a remote
user are configured on
the RADIUS server.
Refer to user manual
of RADIUS server for
more.
Manage VTY
users
Set service type
for VTY users
Required
Scheme
Perform
common
configuration
Perform common
Telnet
configuration
Optional
Refer to
Table 3-2.
3.2 Telnet Configuration with Authentication Mode Being
None
3.2.1 Configuration Procedure
Follow these steps to perform Telnet configuration with the authentication mode being
none:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter one or more VTY
user interface views
user-interface vty
first-number
[ last-number ]
—
Configure not to
authenticate users
logging into VTY user
interfaces
authentication-mode
none
Required
By default, VTY users are
authenticated after logging in.