H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – QoS
H3C S7500 Series Ethernet Switches Chapter 1
QoS Configuration
1-28
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet port
view
interface
interface-type
interface-number
—
Enter QoS view
qos
—
reset traffic-statistic
{ inbound |
outbound } acl-rule
[ system-index ]
Required
Type-A LPUs support this
command.
Clear the statistics of
the traffic matching the
specified ACL rules
reset traffic-statistic
inbound acl-rule
[ system-index ]
Required
Non-type-A LPUs support this
command.
acl-rule: Applied ACL rules which can be the combination of various ACL rules. Type-A
LPUs’ way of combination is described in
Table 1-9, and non-type-A LPUs’ way of
combination is described in
Table 1-10.
1.11.4 Configuration Example
z A switch is connected to 10.1.1.1/24 network segment through its Ethernet 2/0/1
port.
z Collect statistics on traffic from the 10.1.1.1/24 network segment
Configuration procedure:
<H3C> system-view
[H3C] acl number 2000
[H3C-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[H3C-acl-basic-2000] quit
[H3C] interface Ethernet2/0/1
[H3C-Ethernet2/0/1] qos
[H3C-qoss-Ethernet2/0/1] traffic-statistic inbound ip-group 2000
1.12 Configuring Guaranteed Bandwidth
The guaranteed bandwidth feature is to provide the maximum available bandwidth and
minimum guaranteed bandwidth for the specified traffic to get the corresponding
service.
1.12.1 Configuration Prerequisites
z ACL rules used for traffic identifying are defined. Refer to the ACL module in this
manual for defining ACL rules.
z The parameters for the guaranteed bandwidth are specified.