H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster

H3C S7500 Series Ethernet Switches Table of Contents

Table of Contents

Chapter 1 Cluster........................................................................................................................... 1-1

1.1 Cluster Overview................................................................................................................ 1-1

1.1.1 Introduction to HGMP V2 ........................................................................................ 1-1

1.1.2 Introduction to NDP................................................................................................. 1-2

1.1.3 Introduction to NTDP............................................................................................... 1-3

1.1.4 Introduction to Cluster............................................................................................. 1-4

1.1.5 Switch Roles in the Cluster ..................................................................................... 1-5

1.2 Management Device Configuration ................................................................................... 1-6

1.2.1 Management Device Configuration Task List ......................................................... 1-6

1.2.2 Enabling NDP Globally and for Specific Ports ........................................................ 1-7

1.2.3 Configuring NDP-Related Parameters.................................................................... 1-7

1.2.4 Enabling NTDP Globally and for Specific Ports...................................................... 1-7

1.2.5 Configuring NTDP-Related Parameters.................................................................. 1-8

1.2.6 Enabling the Cluster Function................................................................................. 1-8

1.2.7 Configuring Cluster Parameters.............................................................................. 1-9

1.2.8 Configuring Interaction for the Cluster .................................................................. 1-10

1.3 Member Device Configuration ......................................................................................... 1-11

1.3.1 Member Device Configuration Task List............................................................... 1-11

1.3.2 Enabling NDP Globally and for Specific Ports ...................................................... 1-11

1.3.3 Enabling NTDP Globally and for Specific Ports.................................................... 1-11

1.3.4 Configure Member Devices to Access FTP/TFTP Server of the Cluster.............. 1-12

1.4 Intra-Cluster Configuration............................................................................................... 1-12

1.5 Displaying and Maintaining a Cluster .............................................................................. 1-13

1.6 Cluster Configuration Example........................................................................................ 1-13

1.6.1 Cluster Configuration Example ............................................................................. 1-13