H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches Chapter 1
Cluste
r
1-7
Task Remarks
Configuring NTDP-Related Parameters Required
Enabling the Cluster Function Required
Configuring Cluster Parameters Required
Configuring Interaction for the Cluster Required
1.2.2 Enabling NDP Globally and for Specific Ports
Follow these steps to enable NDP globally and for a specific port:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable NDP globally
ndp enable
Required
By default, NDP is
enabled globally
In system view
ndp enable interface
port-list
Enter
Ethernet
port view
interface interface-type
interface-number
Enable
NDP for
the
specified
Ethernet
ports
In
Ether
net
port
view
Enable NDP
on the port
ndp enable
You must choose one
of them
By default, NDP is
enabled on the port
1.2.3 Configuring NDP-Related Parameters
Follow these steps to configure NDP-related parameters:
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the
holdtime of NDP
information
ndp timer aging
aging-in-seconds
Optional
By default, the aging time of NDP
packets is 180 seconds
Configure the
interval to send NDP
packets
ndp timer hello
seconds
Optional
By default, the interval of sending
NDP packets is 60 seconds
1.2.4 Enabling NTDP Globally and for Specific Ports
Follow these steps to enable NTDP globally and for specific ports: