H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches Chapter 1
Cluste
r
1-8
To do… Use the command… Remarks
Enter system view
system-view
—
Enable NTDP globally
ntdp enable
Required
Enter Ethernet port view
interface interface-type
interface-number
—
Enable NTDP for the
Ethernet port
ntdp enable
Required
1.2.5 Configuring NTDP-Related Parameters
Follow these steps to configure NTDP parameters:
To do…
Use the
command…
Remarks
Enter system view
system-view
—
Configure the range within
which topology information
is to be collected
ntdp hop
hop-value
Optional
By default, the hop range for
topology collection is three hops
Configure the hop delay to
forward topology-collection
requests
ntdp timer
hop-delay time
Optional
By default, the delay of the device
is 200 ms
Configure the port delay to
forward topology collection
requests
ntdp timer
port-delay time
Optional
By default, the port delay is 20 ms
Configure the interval to
collect topology information
ntdp timer
interval-in-minut
es
Optional
By default, the interval of topology
collection is 0.
Quit system view
quit
—
Start topology information
collection
ntdp explore
Optional
1.2.6 Enabling the Cluster Function
Follow these steps to enable the cluster function: