H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches Chapter 1
Cluste
r
1-10
II. Building a cluster automatically
Follow these steps to enable the cluster function automatically:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter VLAN interface view
interface Vlan-interface
vlan-id
Required
You are required to
configure the IP address
of the Layer 3 virtual
interface of VLAN 1
before you set up a
cluster. Otherwise, the
cluster cannot be set up.
Configure the IP address
of the VLAN interface
ip address ip-address
{ mask | mask-length }
Required
Enter cluster view
cluster
—
Configure the rang e of
the IP addresses of the
cluster
ip-pool
administrator-ip-address
{ ip-mask |
ip-mask-length }
Required
Build a cluster
automatically
auto-build [ recover ]
Optional
You can build clusters
according to
corresponding prompts
 Note:
z After a cluster is built automatically, ACL 3998 and ACL 3999 will be generated
automatically.
z After a cluster is built automatically, ACL 3998 and ACL 3999 can neither be
configured/modified nor removed.
1.2.8 Configuring Interaction for the Cluster
Follow these steps to configure interaction for the cluster:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter cluster view
cluster
Required
Configure the public FTP server for the
cluster
ftp-server ip-address
Optional