H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches Chapter 1
Cluste
r
1-11
To do… Use the command… Remarks
Configure the TFTP server for the
cluster
tftp-server ip-address
Optional
Configure the logging host for the
cluster
logging-host
ip-address
Optional
Configure the SNMP host for the cluster
snmp-host ip-address
Optional
1.3 Member Device Configuration
1.3.1 Member Device Configuration Task List
Complete the following tasks to configure a member device:
Task Remarks
Enabling NDP Globally and for Specific Ports Required
Enabling NTDP Globally and for Specific Ports Required
Configure Member Devices to Access FTP/TFTP Server of
the Cluster
Required
1.3.2 Enabling NDP Globally and for Specific Ports
Follow these steps to enable NDP globally and for specific ports:
To do…
Use the
command…
Remarks
Enter system view
system-view
—
Enable NDP globally
ndp enable
Required
In system view
ndp enable
interface port-list
Enter
Ethernet
port view
interface
interface-type
interface-number
Enable
NDP for
specified
ports
In
Ethernet
port
view
Enable NDP
on the port
ndp enable
Required
You can choose to
enable NDP in system
view or in Ethernet port
view
1.3.3 Enabling NTDP Globally and for Specific Ports
Follow these steps to enable NTDP globally and for specific ports: