H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches Chapter 1
Cluste
r
1-12
To do… Use the command… Remarks
Enter system view
system-view
—
Enable NTDP globally
ntdp enable
Required
Enter Ethernet port view
interface interface-type
interface-number
—
Enable NTDP for the port
ntdp enable
Required
1.3.4 Configure Member Devices to Access FTP/TFTP Server of the Cluster
Perform the following configuration on a member device:
To do… Use the command… Remarks
Access the public FTP
server of the cluster
ftp cluster
Optional
Available in user view
Download files from the
public TFTP server of the
cluster
tftp cluster get
source-file
[ destination-file ]
Optional
Available in user view
Upload files to the public
TFTP server of the cluster
tftp cluster put
source-file
[ destination-file ]
Optional
Available in user view
1.4 Intra-Cluster Configuration
Follow these steps to configure a cluster:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Add a candidate device to
a cluster
add-member
[ member-number ]
mac-address H-H-H
[ password password ]
Optional
Remove a member device
from the cluster
delete-member
member-number
Optional
Reboot a specified
member device
reboot member
{ member-number |
mac-address H-H-H }
[ eraseflash ]
Optional
Return to system view
quit
—
Return to user view
quit
—