H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches Chapter 1
Cluste
r
1-14
The S7500 switch manages other two member devices as the management device.
The detailed information about the cluster is as follows.
z The two member devices are connected to GigabitEthernet 2/0/2 and
GigabitEthernet 2/0/3 of the management device.
z The management device is connected to the external network through
GigabitEthernet 2/0/1.
z GigabitEthernet 2/0/1 belongs to VLAN 1, whose interface IP address is
163.172.55.1.
z All the devices in the cluster use the same FTP server and TFTP server.
z The FTP server and TFTP server share one IP address: 63.172.55.1.
z The SNMP site and log host share one IP address: 69.172.55.4.
II. Network diagram
集群
Internet
GE2/0/1
GE2
/
0/3 GE2/0/2
Eth1/1 Eth1/1
69.172.55.4
SNMP/loggi
FTP/TFTP Server
63.172.55.1
163.172.55.1
IP address of
VLAN-interface 2
Management
device
MAC address of the
member device
MAC:000f.e201.0011 MAC:000f.e201. 0012
MAC address of the
member device
ng host(NMS)
n Figure 1-3 Network diagram for HGMP cluster configuratio
III. Configuration procedure
1) Configure the member devices (taking one member as an example)
# Enable NDP globally and for Ethernet 1/1.
<H3C> system-view
[H3C] ndp enable
[H3C] interface Ethernet 1/1
[H3C-Ethernet1/1] ndp enable
[H3C-Ethernet1/1] quit
# Enable NTDP globally and for Ethernet 1/1.