H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Cluster

H3C S7500 Series Ethernet Switches Chapter 1

Cluste

1-17

<aaa_1.H3C> tftp cluster put bbb.txt

 Note:

z Upon the completion of the above configurations, you can execute the cluster

switch-to { member-number | mac-address H-H-H } command on the

management device to switch to member device view to maintain and manage a

member device. You can then execute the cluster switch-to administrator

command to resume the management device view.

z You can also reboot a member device by executing the reboot member

{ member-number | mac-address H-H-H } [ eraseflash ] command on the

management device. For detailed information about these configurations, refer to

the preceding description in this chapter.

z After the configuration above, on the SNMP host you can receive logs and SNMP

trap messages of all the cluster members.