H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – SNMP and RMON
H3C S7500 Series Ethernet Switches Chapter 1
SNMP Configuration
1-4
To do… Use the command… Remarks
Set system information
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c |
v3 }* | all } }
Required
By default, the contact
information for system
maintenance is
"Hangzhou H3C
Technologies Co., Ltd.
", the physical location
is "Hangzhou China",
and the SNMP version
is SNMPv3.
Direct
configu
ration
Set a
commun
ity name
snmp-agent
community { read |
write } community-name
[ acl acl-number |
mib-view view-name ]*
Set an
SNMP
group
snmp-agent group { v1
| v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view
notify-view ] [ acl
acl-number ]
Set a
communi
ty name
and
access
right
Indirect
configu
ration
Add a
new
user to
an
SNMP
group
snmp-agent usm-user
{ v1 | v2c } user-name
group-name [ acl
acl-number ]
Required
z In direct
configuration,
SNMPv1 and
SNMPv2c
community names
are set directly.
z In indirect
configuration,
SNMPv3 syntax is
adopted, and the
added user is
equal to the
community name
for SNMPV1 and
SNMPV2C.
z You can choose
either of them as
required.
Set the maximum size of a
SNMP packet that the agent
can send/receive
snmp-agent packet
max-size byte-count
Optional
By default, it is 2,000
bytes.
Set the device engine ID
snmp-agent
local-engineid engineid
Optional
By default, the device
engine ID is
"enterprise number +
device information".
Create or update the view
information
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
Optional
By default, the view
name is ViewDefault
and OID is 1.
Follow these steps to configure SNMP basic functions (SNMPv3):