H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – SNMP and RMON
H3C S7500 Series Ethernet Switches Chapter 2
RMON Configuration
2-5
2.3 Displaying RMON
To do… Use the command… Remarks
Display RMON statistics
display rmon statistics
[ interface-type interface-number ]
Display RMON history
information
display rmon history [ interface-type
interface-number ]
Display RMON alarm
information
display rmon alarm [ entry-number ]
Display extended RMON
alarm information
display rmon prialarm
[ prialarm-entry-number ]
Display RMON events display rmon event [ event-entry ]
Display RMON event logs
display rmon eventlog
[ event-entry ]
Available in
any view
2.4 RMON Configuration Example
I. Network requirements
z Ensure that the SNMP agents are correctly configured before performing RMON
configuration.
z The switch to be tested has a configuration terminal connected to its console port
and is connected to a remote NMS through Internet. Create an entry in the
Ethernet statistics table to make statistics on the Ethernet port performance for
network administrator’s retrieval.
II. Network diagram
Console port
Switch
Internet
Network port
NMS
on Figure 2-1 Network diagram for RMON configurati
III. Configuration procedures
# Configure RMON.
<H3C> system-view
[H3C] interface Ethernet2/0/1
[H3C-Ethernet2/0/1] rmon statistics 1 owner user1-rmon
# View RMON configuration.
[H3C-Ethernet2/0/1] display rmon statistics Ethernet2/0/1