H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – FTP and TFTP
H3C S7500 Series Ethernet Switches Chapter 1
FTP and TFTP Configuration
1-3
Device Configuration Default Description
FTP server
Enable the FTP server,
and configure user
names, passwords, and
the corresponding rights
— —
1.1.2 FTP Configuration: A Switch Functioning as an FTP Server
I. Prerequisites
A switch functions as an FTP server. A remote PC functions as an FTP client. The
network operates properly, as shown in
Figure 1-1.
Network
Network
SwitchSwitch
PCPC
Network
Network
Figure 1-1 Network diagram for FTP configuration
II. Configuration procedure
Follow these steps to configure an FTP server:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the FTP server
function
ftp server enable
Required
By default, the FTP server
function is disabled.
Set the connection idle
time
ftp timeout minutes
Optional
The default connection idle
time is 30 minutes.