H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Information Center

H3C S7500 Series Ethernet Switches Chapter 1

Information Cente

1-4

Module name Description

RMON Remote monitor module

RMX IPX routing module

RRPP Rapid ring protection protocol module

RSA Revest, Shamir and Adleman encryption module

RTA L3+ plug-in card traffic accounting module

RTPRO Routing protocol module

RXTX Lower layer packets receiving and transmitting module

SC Server control module

SHELL User interface module

SNMP Simple network management protocol module

SOCKET Socket module

SSH Secure shell module

SYSM System management module

SYSMIB System MIB module

TAC Terminal access controller module

TELNET Telnet module

TFTPC TFTP client module

TUNNEL Packets transparent transmission module

UDPH UDP helper module

USERLOG User log module

VFS Virtual file system module

VLAN Virtual local area network module

VRRP VRRP (virtual router redundancy protocol) module

VTY VTY (virtual type terminal) module

default Default settings for all the modules

Note that a slash (/) separates the module name and severity level.

5) Severity

Switch information falls into three categories: log information, debugging information

and trap information. The information center classifies each category of information into

eight levels by severity or emergency. The higher the information severity is, the

smaller the corresponding level is. For example, the “debugging” severity corresponds

to level 8, and the “emergencies“ severity corresponds to level 1. If filtered by severity,