H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Cente
r
1-6
Table 1-3 Information channel names and numbers
Output direction Channel number Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP 5 snmpagent
 Note:
Settings for the six output directions are independent of one another. However, for any
output direction, you must first enable the information center function to make all other
settings effective.
The information center of the Ethernet switch features:
z Supporting six information output directions, namely, console (console), monitor
terminal (monitor), log host (loghost), trap buffer (trapbuffer), log buffer (logbuffer)
and SNMP (snmp agent).
z Filtering information by information severity (information is divided into eight
severity levels).
z Filtering information by modules where information is generated.
z Language options (Chinese or English) for information output to a log host.
1.2.1 Enabling Information Output to a Log Host
Follow these steps to enable information output to a log host:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable the information
center
info-center enable
Optional
By default, the information
center is enabled.