H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Cente
r
1-8
To do... Use the command... Remarks
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the console
info-center console channel
{ channel-number |
channel-name }
Required
By default, the switch
uses information channel
0 to output
log/debugging/trap
information to the
console.
Define an
information source
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
Required
Set the format of
time stamp
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Optional
To view debugging/log/trap output information on the console, you should also enable
the terminal display function for corresponding debugging/log/trap information on the
switch.
For example, to view log information of the switch on the console, you should not only
enable log information output to the console, but also enable log information terminal
display using the terminal logging command.
Perform the following operations to enable debugging/log/trap terminal display in user
view:
To do...
Use the
command...
Remarks
Enable the
debugging/log/trap
information terminal
display function
terminal monitor
Optional
By default, this function is
enabled for console users.
Enable the debugging
information terminal
display function
terminal debugging
Optional
By default, the debugging
information terminal display is
disabled for terminal users.
Enable the log information
terminal display function
terminal logging
Optional
By default, log information
terminal display is enabled for
console users.