H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Cente
r
1-9
To do...
Use the
command...
Remarks
Enable trap information
terminal display function
terminal trapping
Optional
By default, trap information
terminal display is enabled for
terminal users.
1.2.3 Enabling Information Output to a Monitor Terminal
Follow these steps to enable information output to a monitor terminal:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to Telnet
terminal or dumb
terminal
info-center monitor
channel
{ channel-number |
channel-name }
Required
By default, a switch outputs
log/debugging/trap information
to user terminals through
information channel 1.
Define an
information source
info-center source
{ modu-name | default }
channel
{ channel-number |
channel-name } [ { log |
trap | debug } { level
severity | state state } ]*
Required
Set the format of
time stamp
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
Optional
This command is used to set
the time stamp format for
log/debugging/trap information
output.
This determines the time stamp
viewable to users.