H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Cente
r
1-11
To do... Use the command... Remarks
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the log
buffer
info-center logbuffer
[ channel { channel-number |
channel-name } | size
buffersize ]* [ | exclude
regular-expression ]
Optional
By default, the switch
uses information channel
4 to output log information
to the log buffer, which
can holds up to 512 items
by default.
Define an
information source
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
Required
Set the format of
time stamp
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Optional
This is to set the time
stamp format for
log/debugging/trap
information output.
This determines the time
stamp viewable to users.
 Note:
To view debugging information of specific modules, you need to set the information
type to debug in the info-center source command, and enable debugging on
corresponding modules using the debugging command as well.
1.2.5 Enabling Information Output to the Trap Buffer
Follow these steps to enable information output to the trap buffer:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.