H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches Chapter 1
Information Cente
r
1-13
To do... Use the command... Remarks
Define an
information
source
info-center source
{ modu-name | default }
channel
{ channel-number |
channel-name } [ { log |
trap | debug } { level
severity | state state } ]*
Required
Set the format of
time stamp
info-center timestamp
{ log | trap |
debugging } { boot |
date | none }
Optional
This is to set the time stamp format
for log/debugging/trap information
output.
This determines the time stamp
viewable to users.
 Note:
z To view debug information of specific modules, you need to set the information type
to debug in the info-center source command, and enable debugging on
corresponding modules using the debugging command as well.
z To send information to remote SNMP workstation properly, related configurations
are required on both the switch and the SNMP workstation.
1.3 Displaying and Maintaining Information Center
Configuration
To do... Use the command... Remarks
Display information on information
channel
display channel
[ channel-number |
channel-name ]
Display the operation status of
information center, the configuration
of information channels, the format of
time stamp and the information output
in case of fabric
display info-center
Display the status of log buffer and
the information recorded in log buffer
display logbuffer [ level
severity | size buffersize ]* [ |
{ begin | exclude | include }
regular-expression ]
Display the summary information
recorded in log buffer
display logbuffer summary
[ level severity ]
Display the status of trap buffer and
the information recorded in trap buffer
display trapbuffer [ size
buffersize ]
Available
in any
view