H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Chapter 2 Basic System Configuration and
Debugging
2-3
To do… Use the command… Remarks
Set the name and
time range of the
daylight saving
time
clock summer-time zone-name one-off
start-time start-date end-time end-date
offset-time
clock summer-time zone-name
repeating { start-time start-date end-time
end-date | start-time start-year
start-month start-week start-day
end-time end-year end-month end-week
end-day } offset-time
Optional
Available in user
view
2.1.7 Setting the CLI Language Mode
To do… Use the command… Remarks
Set the CLI
language mode
language-mode
{ chinese | english }
Optional
By default, the command line
interface (CLI) language mode is
English.
2.1.8 Returning from Current View to Lower Level View
To do… Use the command… Remarks
Return from current
view to lower level view
quit
This operation will result in
exiting the system if current
view is user view.
2.1.9 Returning from Current View to User View
To do… Use the command… Remarks
Return from current
view to user view
return
The composite key <Ctrl+Z>
has the same effect with the
return command.