H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches Chapter 4
Device Management
4-2
maintain and manage your physical device, and restart the system when some
functions of the system are abnormal.
4.2 Device Management Configuration
4.2.1 Device Management Configuration Task List
Complete these tasks to configure device management:
Task Remarks
Restarting the Ethernet Switch —
Rebooting a Card of Ethernet Switch Optional
Scheduling a Reboot on the Switch Optional
Specifying the APP to be Adopted at Reboot Optional
Updating the Boot ROM Optional
Upgrading Boot ROM along with the Upgrade of ARP Optional
Setting Card Temperature Threshold Optional
Enabling/Disabling RDRAM Optional
Enabling System Load Sharing Optional
4.2.2 Restarting the Ethernet Switch
You can perform the following operation in user view when the switch is in trouble or
needs to be restarted.
 Note:
When rebooting, the system checks whether there is any configuration change. If there
is, it prompts you to indicate whether or not to proceed. This prevents you from losing
your original configuration due to oblivion after system reboot.
Follow the step to restart the Ethernet switch:
To do… Use the command… Remarks
Restart the Ethernet switch
reboot
—